10
XB2 Kit
Menu Panel
The menu actions described in this chapter can only be performed with the optional control unit.
But even without the control unit, the display is fully functional and provides information about the
states of the non-illuminated buttons.
With the HX3/XB2 in factory setting, some of the menu items listed below are omitted since
physical controls exist. These menu items can be added to the menu by means of the editor with
the parameters of the Menu Enables group.
On power on, the
Preset/Drawbar menu
is present. Pressing the
rotary knob twice briefly will let you return to the home position from
any other menu position.
Turn the rotary knob to scroll through the menu. A hatched arrow indicates the menu position.
Press the rotary knob once to edit a parameter value
. A white arrow indicates the selected
entry that may be altered. Turn the rotary knob to change that value. Press the rotary know once
again to continue scrolling through the menu.
In the preset/drawbar menu the rotary knob selects the
Presets 0
… 99
. Presets consist of
drawbar settings and optionally tab switch settings (percussion, vibrato etc., including rotary
Run/Fast/Slow), volume and 122 tube amp gain as well as all other effects. Use the Panel in the
HX3.5 Manager, Presets page, to select which parameters are to be recalled with the presets.
Scroll downwards (= turn the rotary knob clockwise) to the drawbar
presets (
Voices
) for
U
pper manual,
L
ower manual, and
P
edal. The
top display line shows the drawbar positions as numbers from 0
– 8.
A star appears at the bottom right of the display, if a parameter value
has been changed and differs from the stored preset. To
store
values as
Preset
, keep the encoder knob pressed until the prompt
“Save to Preset #XX” appears on the display. (“XX” representing the current preset number). Alter
the number as desired and press the knob once again to have all settings stored.
Parameter values tagged by the letter
C
are part of a single preset. Values tagged by
D
apply to
all presets and are stored as
defaults
. The assignment can be changed in the editor of the HX3.5
manager with parameter #1498 or on the Panel
’s Presets page.
Values tagged by
U
,
L
, or
P
are part of the current voice for
U
pper,
L
ower, or
P
edal. These are
saved as Voice (drawbar settings only) if you save them while one of these markers is displayed.