Key System US Atlas IIE KSX 32i Скачать руководство пользователя страница 54

Explanation

ST

Station number.

TK

Trunk number.(20 digits)

Telephone No.  : 

”*********” represents an internal call.

TRF

Transfer the call.

Acc. No. 

Account number.

Date

Date of call (MM/DD).

Start

Starting time of call (HH:MM).

Duration

Length of calls (HH:MM:SS).

Ring

Ring time for incoming call (MM:SS).

Case Explanation

1) On October 12, 10:10 AM, Station 100 made an outgoing call on Trunk 1. The

number dialed was 29579711. The conversation lasted 1 minute and 10 seconds
and then the call was transferred to Station 113.

2) Station 113 continued the call on Trunk 1 for 5 minutes and 20 seconds. Total

time on Trunk 1 was 6 minutes 30 seconds.

3) Incoming call on trunk 4 rang for 15 seconds and was answered by station 143.

Account number 223344 was entered and the call lasted 12 minutes and 16
seconds.

4) Incoming call rang on Trunk 6 for 58 seconds but was not answered.
5) A station alarm rang Station 107 at 12:15 PM.
6) Station 104 completed an Intercom Call to Station 143 at 12:18 PM.

Содержание Atlas IIE KSX 32i




























































Отзывы: