manualshive.com logo in svg

Key System US Atlas IIE KSX 32i, Руководство по установке

Поделиться
Скачать
Key System US Atlas IIE KSX 32i Скачать руководство пользователя страница 3

INTRODUCTION

The

 KSX

 32i comes with two manuals. This manual which contains a step by step

explanation of the installation process, with diagrams. And the

 Programming Guide

 which

introduces the programming process, by which the system can be programmed through the
Keyphones.

The procedures and methods provided in this manual have been prepared in a step by step
manner to assist the installer in planning and performing the installation task, system
operation, and feature operation.

Notice

The information contained in this document is believed to be correct and accurate in all
respects. The information in this document is subject to change without notice. Periodic
changes may be made to, the information contained in this document without any obligation
to notify any person of such changes. No responsibility is assumed for any errors or
omissions in this document.

Caution

This product must be installed by qualified
personnel

Содержание Atlas IIE KSX 32i




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды