background image

Safety Instructions – Please be sure to follow these
instructions for safe operation of your unit

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s 
instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the third prong is provided for 
your safety. If the provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs, conven-
ience receptacles, and the point where they exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Unplug this apparatus during lightning storms or when unused 
for long periods of time.

13.

Refer all servicing to qualified service personnel. Servicing is required when the appa-
ratus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Getting Started  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

IR Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Fat Boy Expansion of the Base KD-MSW8x4Pro  . . . . . . . . . . . . . . . . . . . . . . . .16

RS-232 Protocol and Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Technical Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

How to Contact Key Digital

®

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

© 2007 Key Digital

®

, Inc. All rights reserved.

KD-MSW8x4Pro Operating Instructions

KD-MSW8x4Pro Operating Instructions

KDMSW8x4Pro_Manual.qxd  1/17/07  10:54 AM  Page 5

Содержание KD-MSW8X4Pro

















Отзывы: