DosiPump 1000 User Manual
Page 16 / 24
Version 1.01E
5 Technical information
5.1 Introduction
Chapter "Technical information" contains additional information on operation of the D
OSI
P
UMP
1000. It is
assumed that the unit is operated by a trained D
OSI
P
UMP
1000 user with the required access rights.
5.2 Cleaning
Cleaning procedures must be performed regularly in order to ensure optimum performance of the
D
OSI
P
UMP
1000. The cleaning routine described below must not be considered as absolutely essential. It
serves as a guideline to assist efficient operation of the D
OSI
P
UMP
1000. The decision on when and how
to clean must be made by the individual laboratory.
5.2.1 Materials
required
•
Washing-up liquid - use a mixture of one part washing-up liquid and three parts water.
•
Deionised water
•
Soft-lint-free cleaning cloth and paper tissues
WARNING
Do not use cleaning agents containing acetone or other aggressive cleaning
agents (nitrocellulose thinners,...).
WARNING
Disconnect the mains plug each time before cleaning.
5.2.2 Cleaning
procedures
Cleaning the unit
•
Clean the surface of the unit with a lightly moistened cloth.
•
Wipe off the Plexiglas covers with a lightly moistened cloth.
Cleaning the touch screen
•
The touch screen may be cleaned only with water (or soapy water). Never remove residue by
scratching or scraping the touch screen.
IMPORTANT
Never use too much water since this could otherwise result in water enter-
ing the unit. Never remove residue by scratching or scraping.
5.3 Transporting the D
OSI
P
UMP
1000
IMPORTANT
Remove all tubes and disconnect the unit from the mains power supply be-
fore moving the unit.
IMPORTANT
When moving the unit, always grip it at the bottom and not on the pump
head.
