Key Automation WIND Скачать руководство пользователя

Страница: 32 / 68

Key Automation S.r.l. produces systems for the automation of gates,

garage doors, automatic doors, roller blinds and car-park and road

barriers. However, Key Automation is not the manufacturer of your

complete automation system, which is the outcome of the analysis,

assessment, choice of materials and installation work of your cho-

sen installer. Every automation system is unique, and only your

installer has the experience and skill required to produce a safe,

reliable, durable system tailored to your needs, and above all that

complies with the relevant regulatory standards. Although your au-

tomation system complies with the regulation safety level, this does

not rule out the presence of “residual risk”, meaning the possibility

that hazards may occur, usually due to reckless or even incorrect

use. We would therefore like to give you some advice for the correct

use of the system:

• before using the automation system for the first time, have the

installer explain the potential causes of residual risks to you.

• keep the manual for future reference, and pass it on to any new

owner of the automation system.

• reckless use and misuse of the automation system may make it

dangerous: do not operate the automation system with people, ani-

mal or objects within its range of action.

• a properly designed automation system has a high level of safety,

since its sensor systems prevent it from moving with people or ob-

stacles present so that its operation is always predictable and safe.

However, as a precaution children should not be allowed to play clo-

se to the automation system, and to prevent involuntary activation,

remote controls must not be left within their reach;

• as soon as any system malfunction is noticed, disconnect the

electricity supply and perform the manual release procedure. Never

attempt repairs on your own; call in your installation engineer;

• in the event of a breakdown or power supply failure: while waiting

for the engineer to come (or for the power to be restored if your

system is not equipped with buffer batteries), the automated system

can be used just like any non-automated installation. To do this, the

manual release procedure must be carried out;

• manual release and operation: first bear in mind that the release

procedure can only be carried out with the leaf stationery.

• Maintenance: Like any machine, your automation system needs

regular periodic maintenance to ensure its long life and total safe-

ty. Arrange a periodic maintenance schedule with your installation

engineer. Key Automation recommends that maintenance checks

should be carried out every six months for normal domestic use, but

this interval may vary depending on the level of use. Any inspection,

maintenance or repair work must only be carried out by qualified

staff.

• Never modify the automation system or its programming and setup

parameters: this is the responsibility of your installation engineer.

• Testing, routine maintenance and any repairs must be recorded by

the person who performs them and the documents must be conser-

ved by the system’s owner.

The only procedures you are capable of, and which you are recom

mended to perform, are cleaning of the photocell glass and removal

of any leaves or stones that may obstruct the automation system.

To prevent anyone from activating the gate or door, release the au

tomation system before starting. Clean only with a cloth dipped in

a little water.

• At the end of its useful life, the automation system must be disman

tled by qualified personnel, and the materials must be recycled or

disposed of in compliance with the legislation locally in force.

If after some time your transmitter seems to have become less ef-

fective, or stops operating completely, the battery may be flat (de

pending on the level of use, this may take from several months up

to more than a year). You will realise this because the transmission

confirmation light does not come on, or only lights up for a very

short time.

Batteries contain pollutants: do not dispose of them with normal wa-

ste but follow the methods specified by the local regulations.

Thank you for choosing Key Automation S.r.l.; please visit our Inter

net site www.keyautomation.it for furher information.

7 - INSTRUCTIONS AND WARNINGS FOR THE END USER

Содержание WIND





































































Результаты поиска

Содержание WIND

Отзывы:

Похожие инструкции для WIND

Бренды по названию

Популярные бренды

Key Automation WIND, Инструкции и предупреждения по установке и использованию

Результаты поиска

Содержание WIND

Отзывы:

Похожие инструкции для WIND

Бренды по названию

Популярные бренды