10
DESCRIPTION
EXAMPLE COLOUR BEEP
Start the procedure by pressing and holding the
simultaneously keys
and
until the lighting on the
keyboard turns blue
+ 5
sec.
max
BLUE
> 1 s
Type the master code (unless it has already been changed)
1234
ORANGE
+
> 1s
Type the number of digits the code should consist of
(example: 3)
3
YELLOW
> 1s x3
Repeat the previous sequence
3
GREEN
+
> 1s
DESCRIPTION
EXAMPLE COLOUR BEEP
Start the procedure by pressing and holding the
simultaneously keys
and
until the lighting on the
keyboard turns blue
+ 5
sec.
max
BLUE
> 1 s
Type the master code (unless it has already been changed)
1234
ORANGE
+
> 1s
Type the new four-digit code followed by the operating code
(see table), conclude by typing
2 0 2 0
0 0
YELLOW
> 1s x3
Repeat the previous sequence
2 0 2 0
0 0
GREEN
+
> 1s
4.2 - CHANGE THE MASTER CODE
4.2.1 – CHANGE THE MASTER CODE AND OPERATION OF K1 AND K2
Now the master code is 123.
PLEASE NOTE: each keyboard and/or decoder that will be added later will inherit the number
of digits set on the first pair of devices. In the explanations below, the user codes are made
of four digits.
Until now, the only existing code is master code 1234 and is enabled to operate both relays K1
and K2. It allows the performance of all system configuration operations, therefore it should not be
disclosed for safety reasons.
PLEASE NOTE – some codes cannot be used because they are reserved for other functions.
In case of three-digit codes, do not use the number
001
.
In the case of four-digit codes, do not use numbers
0020 to 0029
(included).
In the following example, the operation of both relays will be disabled.
PLEASE NOTE: code 00 HAS been entered, therefore by typing the master code followed by
or
no relay will be activated, the keyboard lighting will turn red and three short beeps will be emitted
(incorrect code). Below is the list of operating codes that can be used:
CODE
DESCRIPTION
00
all disabled
01
relay K1 enabled
02
relay K2 enabled
03
relays K1 and K2 enabled (default)
4.3 – CREATE USER CODES
Up to 50 user codes can be added.
PLEASE NOTE – some codes cannot be used because they are reserved for other functions.
In case of three-digit codes, do not use the number
001.
In the case of four-digit codes, do not use numbers
0020 to 0029
(included).
