20
ENGLISH
BATTERY KIT
A system with the CT-824S can operate even if there is a mains power outage by installing two 12V
2.2Ah batteries (not supplied) without making any change to the system.
Connection sequence:
•
Disconnect the 230Vac power supply
•
Connect the two batteries in sequence paying attention to the terminal polarity No.33 BAT+
and No. 34 BAT-
•
Check that the safety LED’s come on
•
Re-connect the mains power supply
•
New batteries charge up after about ten hours.
The number of manoeuvres that can be performed with the battery supply depends on many fac-
tors; an approximate example could be 4 complete cycles under the following conditions:
•
hinged doors 3 mt 250 kg
•
system with 1 pair of photocells, snap-in receiver and 1 flasher (20W max.)
•
batteries charged
•
within 5 hours of 230V power supply failure
FINAL WARNINGS
•
The installation of the automation must be performed properly by qualified personnel in pos
-
session of legal requirements and in compliance with machine directive.
•
Check the solidity of existing structures (columns, hinges, doors) in relation to the force gen
-
erated by the motor.
•
Check that there are suitably sturdy mechanical stops at the end of opening and closing
travel of the doors.
•
Analyze the risks of the automation and adopt necessary safety measures and warnings.
•
install controls (such as the key selector) so that the user is not in a hazardous position.
•
Upon completion of installation, check the safety devices several times, as well as those for
signalling and automation release.
•
Provide the automation with the EC label or tag that contains the danger information and
identification data.
•
Give the final user the instructions for use, safety warnings and the EC declaration of con
-
formity.
•
Make sure the user understands proper automatic, manual and emergency operation of the
automation.
•
Inform the user in writing (for example in the instructions for use) of any unprotected residual
risks and foreseeable improper use.
•
Provide a maintenance schedule for the system (at least every 6 months for the safeties)
with an appropriate register of work performed.
•
Keep this instruction manual for future reference.
•
Key Automation S.p.A. reserves the right to make, at any time, any modifications which may
be required to improve appearance and/or operation.
DISPOSAL
This product is composed of various components which may in turn contain pollutants.
Do not dispose of it in the environment! Find out about the method for recycling or dis-
posing of the product in compliance with current local laws
