Kewaunee Air Alert 300, Инструкция по установке и эксплуатации

Страница: 4 / 26

4
1.1 Safety Practices
This document describes the general safety practices and precautions that must be
observed when operating the Airflow Monitor.
This advice is intended to supplement, not supersede, the normal safety codes in the user’s
country. The information provided does not cover every safety procedure that should be
followed. Ultimately, maintenance of a safe laboratory environment is the responsibility of
the user and the user’s organisation.
Please consult all documentation supplied with the Airflow Monitor before starting to work.
Carefully read the safety information in this document and in the other documentation
supplied. When setting up the equipment or performing analysis or maintenance
procedures, strictly follow the instructions provided.
1.2 Warning Notices
Within this User Guide WARNINGS are used to highlight information or instructions that
must be followed in order to avoid personal injury to yourself or other people in the vicinity,
eg. switch off the mains voltage before any maintenance.
WARNINGS appear as below:
WARNING
Switch off the mains voltage and remove the power supply
before maintenance.
1.3 Precautions
The following precautions must be observed when using the Airflow Monitor and associated
systems:
•
Be sure that the voltage of the Airflow Monitor equipment corresponds to the voltage
available where it is to be installed.
•
Never remove the side or back panels of the Airflow Monitor without first shutting
down the equipment and disconnecting the power supply
.