5
These instructions are designed for the installation engi-
neer to assemble the product and for the user to operate
and maintain it. After installation, please pass them on to
the user for safekeeping.
Symbols and their meaning
Caution!
Warning of personal injury or material damage
Caution!
Warning of electric shock.
Caution!
Warning of water damage.
Note, tip or reference
Correct assembly/functional test
Incorrect assembly
Observe assembly details
Optional/accessories
On/o
ff
switch
Front and wall lighting
Washbasin lighting
Light colour - daylight white (cool white)
Light colour warm white
Safety Information
– The electrical installations must be undertaken by a
specialist electrical installer in compliance with IEC
60364-7-701/VDE 0100 Part 701! National and local
regulations must be taken into consideration!
– Do not start the appliance if it or the power supply ca-
ble is damaged, but have it replaced by the manufac-
turer, its customer service or by an equally quali
fi
ed
person.
– It must be ensured that the wall can support the
weight of the mirror.
To prevent personal injury or material damage the as-
sembly must be carried out by two persons.
Intended use
As a light mirror with dimmable lighting for use in wet
rooms such as bathrooms and toilets.
The product is suitable only for mounting indoors!
Caution!
Only install in frost-free rooms.
Important information, please make sure to read!
EN
Declaration of conformity!
This product complies with
the requirements of the valid EU Guidelines. The dec-
laration of conformity for this product can be requested
from the following address:
KEUCO GmbH & Co. KG, Oesestraße 36,
D-58675 Hemer.
Technical data
– Power supply:
220-240V AC 50/60Hz
– max. Power consumption:
Prod. no.:
Width
Weight
Light
33097 XX1000: 460 mm
10.0 kg
25 W
– Protection rating:
IP20
– Ambient conditions:
Temperature
5°– 40° C
– Light colour
2700 - 6500 Kelvin
Mounting dimensions
, see page 2.
Installation
, see
fi
gure 2 onwards on page 21.
Connection,
refer to
fi
gure 3 on page 21.
L
L´
N
= black
EOXH
JUHHQ\HOORZ
EURZQ
Operation
As with a multiway switch, the light mirror can be
operated with the sensor button
A
on the light mirror, or
with an external light switch
B
(installation type
I
); refer
to
fi
gure 3 on page 21.
With connection type
II
the light mirror is permanently
supplied with voltage and can only be actuated with
senor button
A
. With connection type
III
, the light mirror
is only actuated via the external light switch
B
.
KEUCO recommends connection type
I
in combination
with a switch for switching on/o
ff
.
A
B
