2 - 10
Important information – please read!
Safety Instructions
WARNING!
Safety instructions on hazards
with a medium degree of risk!
Failure to comply can result in death
or serious injury.
CAUTION!
Safety instructions on hazards
with a low degree of risk!
Failure to comply can result in minor
to moderate injuries.
NOTICE
Safety instructions on hazards
with a low degree of risk!
Failure to comply can lead to
damages or to the destruction of
the product.
Key to symbols
Warning - risk of electric shock
Warning - risk of water damage
Interior rooms
Note, tip or reference
ON/OFF switch
Light colour: daylight white
Light colour: warm white
Dimmer
Heating
Important safety information
WARNING!
Deadly risk in case of failure to
comply with the documentation!
In order to reduce the risk of injury
from fire, burns or electric shock, the
safety instructions and directions
in this installation manual must be
followed.
Warranty
– A warranty in terms of the safety, functionality and
integrity of the product is only valid if the instructions in
this manual are followed. In case non-compliance, bodily
injury and property damage may occur.
The manufacturer is not liable for damages occurring due
to noncompliance with the instructions.
– The local regulations as well as the general safety and
accident prevention regulations must be observed.
– The product is exclusively intended to be mounted on the
wall in dry rooms. The construction must be capable of
supporting the weight of the product.
– The product has left the factory in perfect and safe
working condition. The product may not be used in case
of damage or malfunction.
General safety information and other information
– Installation may only be carried out by qualified
personnel.
– Before carrying out cabling work, ensure that the lines
are free of voltage. During the cabling work, ensure that
the lines remain free of voltage (e.g. prevent power from
being turned on).
– The product must be grounded with a connection
to a grounded metal object or an existing protective
conductor.
– Before carrying out drilling work, make sure that no water
or power lines are located behind the drilling area.
– The position of the product must be determined by the
user prior to installation.
– The product must be installed by at least two people.
– To avoid damage to the product, it must be handled with
the greatest care.
Rings and other objects that could damage the product
must be removed before installation.
