Kettler Scarpia FS 1.0 LTD Gold Скачать руководство пользователя страница 10

Страница: 10 / 113

MY20K03-2_1.0_18.07.2019

Safety

2.2

Toxic substances

Risk of fire and explosion due to high
temperatures

Excessively high temperatures will damage the
battery. The battery may self-ignite and explode.



Protect the battery against heat.



Never expose the battery to sustained direct
sunlight.

Fire caused by overheated charger

The charger heats up when charging the battery.
In case of insufficient cooling, this can result in
fire or burns to the hands.



Never use the charger on a highly flammable
surface (e.g. paper, carpet etc.).



Never cover the charger during the charging
process.

Never leave the battery unattended during
charging.

Electric shock caused by penetration by
water

If water penetrates into the charger, there is a risk
of electric shock.



Never charge the battery outdoors.

Notice

If you leave a key inserted when riding or
transporting the pedelec, it may break off or the
locking system may open accidentally.



Remove the key from the battery lock
immediately after use.



We recommend that you attach the key to a
key ring.

CAUTION

Intoxication from suspension oil

Suspension oil in the rear frame damper is toxic to
the touch, irritates respiratory tracts and causes
cancer, sterility and mutation in germ cells.



Never disassemble the rear frame damper.



Never allow suspension oil to come into
contact with the skin.

Chemical burns to the skin and eyes caused by
faulty battery

Liquids and vapours may leak from damaged or
faulty batteries. They can irritate the airways and
cause burns.



Avoid contact with leaked liquids.



Ventilate with fresh air and consult a doctor if
you suffer any pain or discomfort.



Immediately consult a doctor in case of
contact with the eyes or any discomfort.



In case of contact with the skin, rinse off
immediately with water.



Ventilate the room well.

Hazard for the environment due to leaking
brake fluid

The brake system contains a toxic, environmentally
harmful brake fluid. Such fluids will contaminate if
they enter the sewers or groundwater.



The brake system must be repaired
immediately if brake fluid leaks out. Contact
your specialist dealer about repair.



Dispose of leaking brake fluid in an
environmentally responsible way in
accordance with statutory regulations. Ask a
specialist dealer for more information.

WARNING

CAUTION

Содержание Scarpia FS 1.0 LTD Gold


















































































































Результаты поиска

Содержание Scarpia FS 1.0 LTD Gold

Отзывы:

Похожие инструкции для Scarpia FS 1.0 LTD Gold

Бренды по названию

Популярные бренды

Kettler Scarpia FS 1.0 LTD Gold, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание Scarpia FS 1.0 LTD Gold

Отзывы:

Похожие инструкции для Scarpia FS 1.0 LTD Gold

Бренды по названию

Популярные бренды