Kettler Quadriga Duo Speed 45, Инструкция по эксплуатации и техническому обслуживанию

Страница: 58 / 128

MY20K10 - 12_1.0_11.01.2021
58
Operation
6.5.5.1 Adjusting the Suntour fork steel
suspension
1 You will find the sag setting wheel beneath the
plastic cover on the crown. Remove the plastic
cover.
Figure 65: Sag setting wheel on the suspension fork crown
 Turn the sag setting wheel clockwise to
increase the spring pre-tensioning.
 Turn the sag setting wheel anti-clockwise to
decrease the spring pre-tensioning.
 You will have made the ideal setting when the
shock absorber deflects 3 mm when subject to
the rider's weight.
2 Replace the plastic cover on the crown after
making the setting.
6.5.5.2 Adjusting the Suntour fork air
suspension
 The air valve is located beneath the air valve
cap on the crown. Twist off the air valve cap .
Figure 66: Screw caps in different designs
1 Attach a high-pressure damper pump to the air
valve .
2 Pump air suspension fork to the required
pressure. Observe the levels in the Suntour
filling pressure table. Never exceed the
recommended maximum air pressure
.
3 Detach high-pressure damper pump.
4 Measure the distance between the crown and
the dust seal. This distance is
total deflection of
the fork.
5 Push a temporarily attached cable tie
downward against the dust seal.
6 Put on your normal cycling clothing, including
luggage.
7 Sit on the S pedelec in your usual riding
position and support yourself against an
object, such as a wall or tree.
8 Get off the S pedelec without allowing it to
deflect.
9 Measure distance between the dust seal and
the cable tie.

This measurement is the sag. The
recommended value is between 15% (hard)
and 30% (soft) of the total fork deflection.
10 Increase or reduce air pressure until you have
reached the desired sag.
11 If the sag is correct, turn the air valve cap
clockwise.
12 If you are unable to achieve the required sag,
an internal adjustment may be needed.
Contact your specialist dealer.
Rider weight AION, NEX XCR 32, XCR 34
< 55 kg 35 - 50 psi 40 - 55 psi
55 - 65 kg 50 - 60 psi 55 - 65 psi
65 - 75 g 60 - 70 psi 65 - 75 psi
75 - 85 kg 70 - 85 psi 75 - 85 psi
85 - 95 kg 85 - 100 psi 85 - 95 psi
< 100 kg + 105 psi + 100 psi
Maximum air
pressure
150 psi 180 psi
Table 31: Suntour filling pressure table for air forks