Kettler K-7122-490, Инструкция по эксплуатации

Страница: 18 / 30

Part 2: CHASSIS ASSEMBLY
Step #9 – CENTER SUPPORT CHASSIS ASSEMBLY
REQUIRED PARTS – 1 Sets INSTRUCTIONS
QTY PART # DESCRIPTION
2 ea CENTER SUPPORT
ASSEMBLY
(From Step 8)
1 ea #14 CENTER SUPPORT CROSS
BRACE
2 ea #28 BLACK BRACE INSERT
2 ea #HDW-3 M8x60 BOLTS
Position the two CENTER SUPPORT ASSEMBLIES with the
connected CENTER PIVOT ASSEMBLY parts facing each
other. (Refer to the diagram above.)
Place the two #28 (BLACK BRACE INSERT) onto each end
of #14 (CENTER SUPPORT CROSS BRACE).
Slip each of the #HDW-13 (25MM WASHER) onto the two
#HDW-3 (M8x60 BOLTS).
Align the holes at the bottom of each of the CENTER
SUPPORT ASSEMBLIES with the holes at each end of the
CENTER SUPPORT CROSS BRACE. Slide the bolt and
washer combination through each CENTER SUPPORT
ASSEMBLY and into the CENTER SUPPORT CROSS BRACE.
Tighten the bolts to secure the assembly.
2ea #HDW-13 25 MM WASHERS
- 18 -