26
■ Setting the pass code
Setting the pass code will disable the setup operation, and alteration of data can be avoided.
At the time of shipment, "9999" is set.
Be careful not to forget the changed pass code.
* To cancel the setting during operation, press the [EXIT] key. Then, the previous screen will be restored.
Step
Display
Operation
①
1 . C H
P A R A M E T E R
2 . C H
D U P L I C A T E
3 . C H
R E S E T
4 . C O M
S E T T I N G
5 . P A S S
C O D E
▶
6 . X P O R T
S E T U P
M O D E
● Select the pass code.
Press the [MENU] key, and enter the pass code.
Move the cursor to [5. PASS CODE] with [
⬆
]/[
⬇
] key. Then,
press the [ENTER] key to set the code.
②
5 . P A S S
C O D E
N E W
C O D E ?
◀
− − −
−
▶
● Enter the pass code. (At the time of shipment, "9999" is set.)
Enter the four digits pass code using the numeric keypad.
The cursor will move to the next position instantly when a
character is input.
③
5 . P A S S
C O D E
N E W
C O D E ?
◀
1 2 3 4
▶
● Set the pass code.
After four digits are input, the cursor will move to the right
end [
▶
] automatically. Pressing the [ENTER] key will restore
the menu screen after saving the pass code.
<To edit>
Move the cursor using the [EXIT] and [ENTER] keys, and enter
the new one using the numeric keypad.
■ Setting XPORT
The XPORT setting is necessary when using the LAN port for communication.
For details, refer to the PC software operating manual (2-2. Setting XPORT).
* To cancel the setting during operation, press the [EXIT] key. Then, the previous screen will be restored.
Step
Display
Operation
①
1 . C H
P A R A M E T E R
2 . C H
D U P L I C A T E
3 . C H
R E S E T
4 . C O M
S E T T I N G
5 . P A S S
C O D E
6 . X P O R T
S E T U P
M O D E
▶
6 . X P O R T
S E T U P
M O D E
O K
▶
C A N C E L
▶
● Select XPORT setting.
Press the [MENU] key, and enter the pass code.
Move the cursor to [6. XPORT SETUP MODE] with [
⬆
]/[
⬇
]
key. Then, press the [ENTER] key to set.
* If not using the LAN port, press the [ENTER] key while
[CANCEL] is selected. The menu screen will be restored.
