8
5. Preparation and Configuration
• This instrument is equipped with an integrated weighing scale. For optimal results, this instrument should be placed on
a horizontal surface and used in locations where the wind is not strong and the instrument isn’t subject to vibration.
• Do not hit the instrument during operation and do not leave the instrument upside down.
• Although this instrument performs automatic temperature correction, for optimal measurement, leave this
instrument at ambient temperature for 2 hours or more before use.
• The temperature sensor embedded in the main unit measures the ambient temperature around the measuring
unit and automatically performs temperature correction. If the displayed measured value blinks (warning
indication), see “8. Error Display” on page 16.
5-1. Battery Installation
Th
e
unit is powered by four 1.5 V batteries (AA,
manganese). Remove the bottom battery cover,
place the batteries into the compartment, ensuring
to correctly orient the positive (+) and negative (–)
terminals. Then replace the battery cover.
5-2. Product number viewing
(1) Press the
key.
(A buzzer sounds for 2 seconds, and all contents are
displayed, the four-digit number in the upper left while
displaying the all contents is the version number.)
(2) The number of the product that was measured during
the last test is displayed. In the case of the drawing
(right) the product number is “01 PKSD”.
