INSTALLATION
Part 5: Apply Joint Compound
Note:
Skip this section if you have a flangeless millwork installation.
1. Apply skim coat up to the aperture rim using a joint compound. (For flangeless mud-in versions, cover
the flange but not the retainer.) For best results, use a full ceiling float (see
fig. 10
).
2. Sand and finish the final surface before removing the aperture plug. Clean the internal surfaces of the
trim retainer with a clean rag and isopropyl alcohol.
Part 6: Apply Trim
Flangeless mud-in and flanged downlights have different processes for applying their trims. Please read
only the appropriate section below.
1. Applying trim to
flangeless mud-in downlight
a. Press the flangeless trim into the trim retainer (see
fig. 1
1).
fig. 10
fig. 11
continued on next page
14 |
D3
INSTALLATION GUIDE
P/N 3662360 Rev C
© 2019-2020 Ketra, Inc. All rights reserved.
