• WIFI SETTINGS: Used to toggle between WIFI Enabled and Disabled. To toggle SELECT WIFI
Enabled with the ENTER key. Select MENU to exit WIFI Settings, the controller will automatically
reboot with WIFI Disabled. Repeat to re-enable WIFI. To connect Second Shooter Plus via USB
the WIFI should be disabled on the controller
• MOTOR OPTIONS
• AXIS ENABLE/DISABLE: Used to Enable and Disable individual axes. To disable an
axis, highlight desired axis with the UP/DOWN arrow key and press ENTER. The axes
will be crossed out, showing that it is disabled.
• FAST MODE: Used to enable or disable Fast Mode. Press ENTER to toggle between
Fast Mode Enabled and Disabled
• QUIET MODE: Used to enable or disable Quite Mode. Press ENTER to toggle between
Quite Mode Enabled and Disabled. When Quite Mode is enabled Motor RPM’s can be
changed from 1,000-4,000 by highlighting Quite RPM with the arrow key pressing ENTER
and then changing the speed with the UP and DOWN ARROWS and pressing ENTER.
MAIN MENU
Once the power up menu is exited, the main menu is displayed with the following menu items:
• PROGRAM MOVE: Select PROGRAM MOVE to set up a 2 or 3 key frame move. (Page 8-10)
• MANUAL MOVE: Select MANUAL MOVE to use the controller to move your axis manually
using the directional buttons on the Second Shooter Plus controller. (Page 10)
• TURNTABLE: Select TURNTABLE to use the controller for continuous panning (Page 10)
• SETTINGS: Select SETTINGS to get to, OPERATING MODE, CONTROL OPTIONS, FIRM-
WARE UPDATE AND LASH COMPENSATION (Page 11)
PROGRAM MOVE
• Select PROGRAM MOVE to choose 2 or 3 key frames for the move. (If using a Master/Slave
configuration press SHIFT twice to toggle between Master/Slave motors (Page 7))
• Move your motors to desired beginning position and press ENTER to SET 1ST KEY FRAME.
• Move motors to desired 2nd position and press ENTER to SET 2ND KEY FRAME.
• If setting up a 3 key frame move then move motors to desired 3rd position and press ENTER to
SET 3RD KEY FRAME.
• Now choose one of the following shooting modes
•
LOOP/SCRUB: Loop your 2 or 3 key frame move for a set amount of time or
manually Scrub through the 2 or 3 key frame move (Page 8-9)
•
RUN ONCE: Run through a 2 or 3 key frame move one time (Page 9)
•
TIME LAPSE: Create a basic or complex timelapse with a 2 or 3 keyframe move (Page
9-10)
8
