USING KOS WITH SECOND SHOOTER PLUS
To use the Second Shooter Plus controller with kOS software, you will need kOS for Second Shooter
v4.5 or greater for Mac, Windows or iPad. The Second Shooter Plus is not compatible with kOS software
versions prior to v4.5.
CONNECTING TO KOS VIA USB
• Connect USB/Micro USB cable to computer and Second Shooter Plus controller.
• Open kOS and click connect. Your Second Shooter Plus will automatically connect to kOS.
CONNECTING TO KOS VIA WIFI
• Press the Menu button until the main version screen is displayed. Once the version is dis-
played, the Operation Mode menu will display.
• If the WiFi menu option reads “WiFi Enabled”, the WiFi access point is active. Proceed to #4
• If the WiFi menu option reads “WiFi Disabled”, select it and press the Enter button, your Sec-
ond Shooter Plus will reboot and will now say “WiFi Enabled”.
• On your computer or tablet you will now see a WiFi network named “2nd”. Connect to
that wireless network.
• Once connected to the “2nd” network, open kOS and it will automatically connect to
your Second Shooter Plus via WiFi
UPDATING FIRMWARE
• Download and extract the attached zip file. There are 2 files within the zip. The one you will
need is SECOND.IMG.
• Plug in the power cord for the Second Shooter controller.
• Plug the micro-USB to USB cable from the USB port on the computer into the micro-USB port
on the controller.
• Once system powers up, navigate to SETTINGS.
• In SETTINGS, find and select FIRMWARE UPDATE. The Controller will display FIRMWARE
UPDATE READY…
• The Controller will show up as a USB device on your computer titled 2nd Shooter.
• Go to the location where you extracted
SECOND.IMG.
12
