Kessel Control Unit Ecolift 230V, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 34 / 120

34/120 2016/02
TECHNICAL DATA
5. Technical data
Current 4.9 A /cos
ɸ = 1
Operating mode pump
S3 - 30% at 35°C
Delivery rate at 0.3 bar backwater pressure Q = 2.8 l/s
Mains voltage (primary) 230 V AC 50 Hz (plug)
Standby power approx. 2.5 W
Power 1200 W max.
Potential-free contact (accessory) 42 V DC / 0.5A
Application temperature control unit 0°C to + 50°C
Protective rating IP 54 (control unit),
IP 68, 0.3 bar (pump, probe) 24 h
Protective class I
Protective rating (complete system without control unit) IP 68 with max. 3 mWS and max. 24 h
Connection type Safety plug
Cable length 1.4m
Required fuse protection C 16 A 1-pole
battery, 9V type MN, Duracell, order no. 197-081 *2) 2 x
Alternatively, the following can be used (9V, ANSI 1604): Energizer Alcaline 522, Ultralife U9VLBP
5.1. Shortening or lengthening the pump/probe connection cable
Extensions to be ordered (length 10m)
• Art. # 80889 Probe
• Art. # 80890 Motor
• Art. # 80891 Pump
The maximum cable length of 30 m must not
per hour.
If a connection cable is shortened, the wires must
be placed as shown in Fig. [30].
[16]
2.
3.
1.