4
INSTALLATION INSTRUCTION
Replacement Probe + Adaptor (Art.No. 80888)
For all Staufix Premium and Ecolift backwater valves / pumps for the following control units
80073, 28073, 80071, 28071, 21071
and replacement probe 80085, 80086, 80087, 80088
Please follow the safety and product information contained in the Install. and User's manual
• When replacing the pump probe the red plastic adaptor must be pro-
perly connected (attached and turn a quarter turn counter clockwise).
Also take the small red sticker and stick it to the probe cable near the
connection plug (see photos 1-3).
• When replacing the motor probe the black plastic adaptor must be
connected (see photos 4-6)
• These raised tips prevent
the probe from being con-
nected improperly and must
always point upward.
①
②
③
④
Contents of delivery
If required on-site (ex. for conduit pipes, cable length changes, etc.)
Unscrew the
black connector.
Remove plug.
Remove any residue.
Insert cables until they
contact back of plug.
Adaptor installation instructions:
Restrip cables.
Valid beginning Jan 2011
⑤
⑥
Continued page 5
010-880_6SPRACHIG_DIN_A5.QXP_Layout 1 05.03.13 13:38 Seite 4