Kesseböhmer LifeUP You, Руководство пользователя

Страница: 23 / 28

23
Betrieb DesignComfort-Covert / Operation
Memory speichern
M drücken und halten für 1 sec < M < 3 sec. Dann innerhalb
3 sec F1, F2, F3 oder F4 drücken.
Bestätigung der gespeicherten Position durch Doppelklick
Memory anfahren
F1, F2,F3 oder F4 drücken und halten, bis gewünschte
Position erreicht ist (siehe Höhenanzeige).
Tastensperre ein/aus
M drücken und halten >10 sec
When starting up the operating system for the first time, a reset is required. Through the reset,
e.g. with a table, all columns are brought to the same level in the middle table position. This
ensures that the table top moves parallel to the ground. In addition, the standard version of the
control system saves the number and type of connected components (columns) and any
connected sensor. A&er the reset, configuration changes are detected and classified as errors.
The system will not move until the saved state is restored.
Reset
Exit the energy-saving mode of the control system by
briefly pressing the UP or DOWN button.
Hold down the UP and DOWN buttons at the same time.
A&er approx. 3 seconds, the reset starts.
The attainment of the reset position is confirmed by
a double clicking sound; now you may release the buttons.
Upward movement
Press and hold UP; display shows table top height in cm
or inches.
Downward movement
Press and hold DOWN; display shows table top height.
Save to memory
Press and hold M for 1 to 3 sec. Then press F1, F2, F3
or F4 within 3 sec.
Confirmation of the saved position by a double clicking sound.
Start from memory
Press F1, F2, F3 or F4 and hold until the desired position
is reached (see height display).
Button lock on/off
Press and hold M for up to 10 sec.