6.1 Opening the CLIMBER slat lifter attachment
If the slat lifter is in the closed position, you only need to touch the sensor button and the slats will
raise.
6.2 Closing the CLIMBER slat lifter attachment
If the slat lifter is in the open position, you only need to touch the sensor button again and the slats will
lower.
7. Safety switch-off
The drive is fitted with a safety switch-off in the UP and DOWN directions.
7.1 Safety switch-off in UP direction
If the slats are moving in the UP direction and are blocked, or the block recognition activates due to
increasing force requirements, the motor is briefly switched off and reversed using a power switch-off.
7.2 Safety switch-off in DOWN direction
As soon as the slats meet an obstacle in the DOWN direction, the motor stops and reverses a little.
This reverse movement is not carried out in vicinity of the bottom (approx. 5 cm), but only above this.
The next travel direction is then UP.
%
