Kersten UB 6080 MH, Оригинальная инструкция по эксплуатации

Страница: 13 / 54

2017-10-23 13 / 53
Weedbrush UB 6080 MH
Foreword ENG
2 Foreword
Dear Customer,
Thank you for choosing a quality product from Kersten.
This product has been manufactured according to the latest manufacturing
techniques and comprehensive quality assurance measures, because only when
you are satisfied with your device, our goal is reached.
Before using this machine or implement for the first time, please read this manual
thoroughly and thoroughly.
If you do not understand any of the information contained in this safety data sheet
or the product-specific installation or operating instructions, please contact your
sales representative or the machine manufacturer directly.
Keep this manual handy. If necessary, you can read important information and
instructions.
Have fun with your Kersten - device wishes you
Dipl.- Ing. (FH) Robert Bosch
Managing Director
2.1 Overview
Figure 1 (See Chapter 1 Figures on page 6) shows the basic structure of the weed
brush.
The weed brush consists of a steel construction with an angle gear on which the
brush plate (02) is mounted. The brush plate (02) can be equipped with a tufting
(07) or with wire rope pegs. By the rotation of the brush plate (02) and the
propulsion of the carrier vehicle, the weeds are removed from the joints and
collected by a side mounted splash guard frame with signal band (01) and rubber
spray tabs (08).