8
3.2.6 Screw connections and tires
When working on the wheels, make sure that the device is safely parked and secured
against rolling away!
Check nuts and bolts regularly for tightness and retighten if necessary.
Repair work on the tires may only be carried out by qualified personnel and with a suitable
assembly tool!
If the tire pressure is too high there is a risk of explosion!
Check the air pressure regularly.
3.2.7 Coupling and uncoupling attachments
Only connect and disconnect implements with the engine switched off and the PTO
switched off.
When changing attachments and their parts, use suitable tools and wear gloves.
When mounting and dismounting, bring the required support equipment into the respective
position and ensure sufficient stability.
Secure the self-propelled work machine and the attachment to prevent it from rolling
(parking brake, wheel chocks).
When attaching attachments, there is a risk of injury (crushing). Special care is necessary.
Attach implements according to regulations and fix in the prescribed places.
3.2.8 Maintenance, cleaning and repair work
Only carry out maintenance and cleaning work with the drive switched off and the motor
stationary!
If guards and working tools are subject to wear, they must be checked regularly and
replaced if necessary.
Only use original spare parts from the manufacturer, as these meet the technical
requirements and thus the risk of accidents is minimized!
Cleaning with the high-pressure cleaner should be carried out so that the water jet is not
directly in stock, turned parts, grease nipples, shaft seals, wheel hubs
etc. is held. After each cleaning with the high-pressure cleaner, the lubrication
be greased. In case of infringement, the right to guarantee expires!
Check the moving parts for ease of movement and grease if necessary!
After maintenance and cleaning work, be sure to re-install the guards and put them in the
protective position!
To avoid the risk of fire, keep the machine clean!
Check nuts and bolts regularly for tightness and retighten if necessary.
During maintenance, cleaning and repair work on the lifted device, always make sure that it
is protected by suitable support elements!
Make sure that the hydraulic system is depressurised before carrying out any repairs,
because fluids under pressure can penetrate the skin and cause serious injury
cause! Therefore, seek medical attention immediately - risk of infection!
Repairs may only be carried out by qualified personnel.
Check hydraulic hose lines for damage and aging at regular intervals and replace if
necessary.
When welding the tractor or mounted equipment, disconnect the battery.
Repair work such as welding, grinding, drilling, etc. must not be carried out on supporting
and other safety-related parts such as frames, axles, etc.!
Disposal; warranty