Kernau KDI 6754, Руководство пользователя

Страница: 61 / 124

61
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
The installation and repairing procedures should always carried out by the Authorised Service Agent in order
to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorised persons. Repairs may be carried out by technicians only. If a component has to
be replaced, ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage and put the user at
considerable risk.
Contact information for your customer service can be found on the back of this document. Function-relevant
genuine spare parts according to the corresponding Ecodesign order can be obtained from Customer Service
for a period of at least 10 years from the date on which your appliance was placed on the market within the
European Economic Area.
TROUBLE
CODE
POSSIBLE FAULT POSSIBLE FAULT
FF
Water inlet system failure.
Make sure the water inlet tap is open and
water is flowing.
Separate the inlet hose from the tap and
clean the filter of the hose.
Contact for service if the error continues.
F5 Pressure system failure. Contact for service.
F3 Continuous water input Close the tap and contact for service.
F2 Inability to discharge water.
Water discharge hose and filters may be
clogged.
Cancel the program.
If the error continues, contact for service.
F8 Heater error. Contact for service.
F1 Overflow.
Unplug the machine and close the tap.
Contact for service.
FE Faulty electronic card Contact for service.
F7 Overheating. Contact for service.
F9 Divisor position error. Contact for service.
F6 Faulty heater sensor. Contact for service.
HI High voltage failure. Contact for service.
LO Low voltage failure. Contact for service.