Kernau KDI 6754, Руководство пользователя

Страница: 47 / 124

47
USING COMBINED DETERGENTS
These products should be used according to the manufacturer’s instructions. Never put combined detergents
into the interior section or the cutlery basket.Combined detergents contain not only the detergent but also
rinse-aid, salt replacement substances and additional components depending on the combination. We
recommend you do not use combined detergents in short programmes. Please use powder detergents in such
programmes.If you encounter problems when using combined detergents, please contact the detergent
manufacturer.When you stop using combined detergents, make sure that water hardness and rinse aid settings
are set to the correct level.
RINSE-AID USAGE
The rinse aid helps to dry the dishes without streaks and stains. Rinse-aid is required for stain-free utensils
and clear glasses. The rinse aid is automatically released during the hot rinse phase. If rinse aid dosage setting
set too low, whitish stains remains on dishes and dishes do not dry and washed clean. If rinse aid dosage
setting set too height, you can see bluish layers on glass and dishes.
FILLING THE RINSE-AID AND SETTING
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse aid
to the MAX level and then close the cap. Be careful not to overfill the rinse aid compartment and wipe up
any spills.
In order to change the rinse aid level, follow the below steps before turning on the machine:
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned on.
• Hold down the Programme button until “rA” disappears. Rinse aid setting follows water
hardness setting.
• The machine will display the last setting.
• Change the level by pressing the Programme button.
• Turn off the machine to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your dishes,
decrease the level.