background image

5  Unpacking, Setup and Commissioning 

5.1  Installation Site, Location of Use 

The unit is designed to achieve reliable display results under normal conditions of 
use.  
 
 

Therefore, observe the following for the installation site: 

 

  Protect the unit against severe vibrations; 

  Protect the appliance against high humidity, vapours and dust; 

  Do not expose the device to extreme dampness for longer periods of time. 

Non-permitted condensation (condensation of air humidity on the appliance) 
may occur if a cold appliance is taken to a considerably warmer environment. 
In this case, acclimatize the disconnected appliance for ca. 2 hours at room 
temperature. 

  Avoid static charge. 

 
Major display deviations (incorrect weighing results) may be experienced should 
electromagnetic fields (e.g. due to mobile phones or radio equipment), static 
electricity accumulations or instable power supply occur. Change location or remove 
source of interference.  
 

5.2  Unpacking  

Carefully take the unit out of the packaging, remove the plastic jacket and mount the 

second display unit at the intended workplace.  

 

5.2.1  Scope of delivery  

 

Serial accessories: 

 

 

  1 interface cable to balance 

  Mains power supply 

 Operating 

Manual

 

 

5.3  Mains connection 

Power is supplied via the external mains adapter. The stated voltage value must be 
the same as the local voltage.  
Only use original KERN mains adapters. Using other makes requires consent by 
KERN.  
 

YKD-BA-e-0710

 

7

Содержание YKD












Отзывы: