background image

1  Technical data 

 
Second LCD with a numeral height of 25 mm 
 
Voltage supply is provided by the supplied plug-in power unit 9V 300 mA  
or by a 9V block battery. 
 
3 x RS232 interface: 
1 input port for link-up to balance 
2 output ports for connection of printers, PC, label printers etc. 
 
 
 

2  Basic Information (General) 

2.1  Proper use 

The second display unit acquired by you serves as an additional display unit away 
from the balance and is used for the display of the weighing value for material to be 
weighed. It is possible to connect a further 2 devices with serial RS232 interfaces. 
 
 

2.2  Improper Use 

Never operate second display unit in explosive environment. The serial version is not 
explosion protected. 
The structure of the second display may not be modified. This may result in incorrect 
display results, safety-related defects as well as destruction. 
The second display may only be used according to the described conditions. Other 
areas of use must be released by KERN in writing. 
 

2.3  Warranty 

 
Warranty claims shall be voided in case  

 

  Our conditions in the operation manual are ignored 

  The appliance is used outside the described uses 

  The appliance is modified or opened 

  mechanical damage and damage caused by media, liquids  

natural wear and tear 

  The appliance is improperly set up or incorrectly electrically connected 

 

YKD-BA-e-0710

 

5

Содержание YKD












Отзывы: