7.8
Adding
The display unit offers an option that allows the addition of weighings and the display
of the total weight. When the tare weight is active, the net weight is automatically
added up.
Ö
Loading the system with the load to be added
Ö
To add the weighed weight to the memory, press the
PRINT
TOTAL
button.
In the display appears shortly „
AddEd
“.
Then the balance returns automatically into the weighing mode.
If the balance is connected to a printer, the displayed value will be printed out.
The gross, net and tare weights are added.
or:
Ö
To read the total weight calculated so far, press the
PRINT
TOTAL
button for three seconds.
The display alternately displays for 3 seconds the consecutive numbers (number of
weighings) and the total value of the weighings in the memory.
Ö
As long as the total value is displayed, press the
PRINT
TOTAL
button for approx. 3
seconds.
The total value is printed out and at the same time the memory will be deleted.
Ö
As long as the total value is displayed, press the
ON/
UNIT
OFF
button.
The memory is deleted without printing the total value.
If during the display no button is pressed, the subtotal will remain in the memory and
the balance after approx. 60 seconds will automatically return to the weighing mode.
7.9
Weighing units switch-over
The balance has the possibility to switch over between the units kg and lb.
Ö
Press button
ON/
UNIT
OFF
.
The weight of the placed sample is displayed for 5 seconds, after that the balance
returns automatically to the starting unit.
VHT-BA-e-0910
18