7.7
Parts counting
During piece counting parts can either be counted into a container or out of a
container. To count a greater number of parts the average weight per part has to be
determined with a small quantity (reference quantity).
The larger the reference quantity, the higher the counting exactness. High reference
must be selected for small parts or parts with considerably different sizes.
CAUTION
The larger the reference quantity, the more accurate the parts
counting.
ATTENTION! If the exactness during calculation is too low, the
indicator will show “ERR05”. Press any button to return to the piece
counting mode, and increase the quantity to be calculated.
7.7.1
Piece counting by placing the parts
Ö
Press the
button.
In the display appears e.g. „add10“. The ‘kg’ display vanishes and the ‘pcs’ display
appears.
Ö
Put 10 sample parts onto the balance
Ö
Press
[
] button
The process is finished and the quantity of parts is displayed.
or:
Ö
Change the piece quantity using
PRINT
TOTAL
[ ] or
(
)
PRE-
[ ] button.
The new piece quantity is displayed, e.g. „add50“.
Ö
Place the indicated quantity of pieces and press the
[
] button
The process is finished and the quantity of parts is displayed.
Ö
Press
ON/
UNIT
OFF
The balance returns to the weighing mode, the weighed piece quantity now will be
deleted.
VHT-BA-e-0910
16