KERN ITB 1500K500M страница 16 Скачать руководство пользователя

Страница: 16 / 37

Chapter 3: The menu

Display SCALE

Press the

key

Display METROLO

Press the

key until "GEO" appears..

Display GEO (adjustment by means of GEO value)

The GEO value can be set in this block and the balance also adapted to the local gravity ratios without adjusting weights.

Case a)You are familiar with the GEO values.

In this case, adjustment can be carried out without adjusting weights.Once the

key has been pressed, the

current GEO value will be displayed. Press the

key in order to alter the GEO value. The next value is displayed

every time the key is pressed (adjustment range: 0 - 31). See the GEO value chart in

chapter 5.4

for the

appropriate value. Confirm the selected GEO value using the

key . LIN-CAL will appear on the display screen

and adjustment is now completed. Press the

key until "END" appears. Press the

key

SAVE

will appear on

the display screen.Use the

key to confirm. Following this the balance will return to weighing mode.

Please note

: The GEO value may not be re-adjusted following this adjustment by means of GEO value, as this

would cause the set adjusting values to become invalid.

Case b)You are NOT familiar with the GEO values.

In this case adjustment must be made using adjusting weights.
Press the

key .

Display LIN-CAL

Press the

key

Display CAL (adjustment by means of adjusting weights)

Press the

key. PRELOAD will appear on the display screen.

Press the

key in ordfer to start the calibration procedure.

You will subsequently be asked to adjust your weighing system at a certain value

In the event that you do

not

wish to make the adjustment using this value

(e.g. because you do not have sufficient weights at your disposal, keep pressing the

key

until the desired adjusting weight appears on the display screen (the adjusting weight is

reduced each time the key is pressed).

Note

: It is recommended in general to adjust the balance when

fully loaded

Apply the selected adjusting weight and use the

key to confirm.

Successful completion of adjustment is confirmed when done appears on the display screen.

"display

will appear automatically on the display screen.

Press the

key until "END" appears.

Remove the adjusting weights from the weighing plate!

Press the

key order to save the alterations.

SAVE

will appear on the display screen.

Press the

key to confirm.

Following this the balance will return to weighing mode.

After you exit from the service mode, the scale must be switched off and then

back on again!

Содержание ITB 1500K500M






































Результаты поиска

Содержание ITB 1500K500M

Отзывы:

Похожие инструкции для ITB 1500K500M

Бренды по названию

Популярные бренды

KERN ITB 1500K500M, Руководство по эксплуатации

Результаты поиска

Содержание ITB 1500K500M

Отзывы:

Похожие инструкции для ITB 1500K500M

Бренды по названию

Популярные бренды