Chapter 3: The menu
11
3
The menu
The menu can be used to change the settings for the scale and to activate functions, thereby allowing the scale to be adapted to
individual weighing neeeds.
Important
: To avoid incorrect operation of the scale in normal use, the menu can be protected with a password. The scale
differentiates between a user and a supervisor. When the scale leaves the factory, the entire menu can be accessed by both user
and supervisor.
We therefore recommend you to define your own supervisor password as soon as you set up the scale
(
Chapter 3.6.2
). This limits access by the user to a small number of menu items (calibration, and settings for energy-saving
mode and backlighting).
3.1
Overview and operation
Chapter 3.3 contains a complete overview of the menu and all the possible settings.
3.2
Calling up the menu and entering the password
COdE
Press the
key and hold it down until the prompt to enter the password appears.
User
: No password required, just press the
key.
Supervisor
: Enter password (sequence of keystrokes)
immediately
and confirm with
the
key, otherwise after a few seconds the scale returns to weighing mode. If an
incorrect password is entered, the menu cannot be called up.
Note
: When the scale leaves the factory no supervisor password is defined, so when
the password is requested, just press the
key.
If the password entered is correct, the first block of the menu appears (SCALE).
J
○
○
○
○
○
Request password
CodE
=.00Ð
Weighing mode
Chapter 3.2
Enter password
- - - -
J
Operator
Supervisor
J
Quit menu
End
Diagnosis
d1AGNOS
Interfaces
COMMUN1
Terminal
tERM1NL
Applications
APPL1C
Scale
SCALE
J
J
J
J
J
J
J
J
Chapter 3.4
J
Chapter 3.5
J
Chapter 3.6
J
Chapter 3.7
J
Chapter 3.8
Chapter 3.9
J
Press
and hold down (call up menu)
Press
key briefly (Yes)
Press
key briefly (No)
key jumps direct to end of menu (End)
navigates backward through the menu
If no key is operated for 3 min. the menu is closed (without saving changes
to settings)
J
J
J
