KERN FKTF 12K2LM, Руководство по эксплуатации

Страница: 17 / 26

FKTF-BA-e-1512 17
Here, the tolerance data as set-
point, upper limit, lower limit, lower
limit 1 and lower limit 2 can be en-
tered.
Under "Quantity", the number of
the tested measurement objects
can be entered.
The arrow key can be used to
scroll to the previous page or to
the next page.
Caution:
The automatic limit value calculation is active if under MENU / Configuration /
Setting control mode / Tolerance the "tolerance" is set to automatically and the
verification switch is active. After entering a setpoint the ohter limits are auto-
matically calculated according to the statutory FPVO regulation.
On page 3 of the item you will get
insight into the respective daily and
weekly statistics. If desired, these can
be printed.
Caution:
The daily and weekly statistics are
only visible if you have been activat-
ed under MENU / Configuration / Set-
ting control mode / Statistic.
With "Manual tare" you can enter the
desired automatic tare value.
Generally:
By clicking the "HOME" button you get
back to the start-up screen.
The "back arrow" key allows one page
back.
With "CLR" all product data will be delet-
ed.