4
■
Heizkörper mit Konsolen auf befestigte
Konsolenfüße (2) aufsetzen (Abb. 16).
■
Heizkörper horizontal ausrichten: je Konso-
le Gewindestift (5) lockern und den Abstand
korrigieren, wieder festziehen (Abb. 17).
■
Verpackung bis Inbetriebnahme wieder
vollständig über den Heizkörper ziehen
(Abb. 18).
EN – Instruction manual
Permissible use
Soil stand bracket ZB05180001 (ZB0518)
The soil stand bracket may only be used for
mounting Kermi steel panel radiators type 12
Vplus (FTP, PTP, PLP) of height 300–600 mm
and length 600–2600 mm and type 12 com-
pact or valve (FK0, FH0, FTV, PK0, PH0, PTV,
PLK, PLV) of height 300–600 mm and all
lengths for application class 2.
Soil stand bracket ZB05190001 (ZB0519)
The soil stand bracket may only be used for
mounting Kermi steel panel radiators type 20,
22, 30, 33 Vplus (FTP, PTP, PLP) of length 600–
2600 mm and type 20, 22, 30, 33 compact or
valve (FK0, FH0, FTV, PK0, PH0, PTV, PLK, PLV)
of all lengths for application class 2.
Any other use is contrary to the intended pur-
pose and therefore not permissible.
Safety information
■
Read these instructions thoroughly before
starting with the installation.
■
Observe all instructions regarding the in-
stallation site, technical data, application
limits, floor condition, and wall clearance.
■
After installation, hand over the
instructions to the end consumer
.
■
The installation materials must only be
transported and stored inside the protective
packaging.
Warning
Risk of injury!
■
Note the weight of the radiator (see manu-
facturer's data).
■
At 25 kg and above, the work should be
carried out with a lifting device or by se-
veral persons.
Maintenance and cleaning
■
The soil stand brackets do not require any
special maintenance.
■
Use only mild, non-scouring cleaning agents.
Complaints
■
In case of damage, contact your specialist
partner!
■
Only allow specialist partners to carry out
installation and repair work to prevent any
warranty claims from being rendered null
and void.
Disposal
■
Ensure the packaging and any unneeded
parts are recycled or arrange for their pro-
per disposal. Comply with local regulations.
Installation
The soil stand brackets must only be installed
by a specialist installer.
Scope of delivery, packaging, and tools
■
Check the contents of the soil stand bra-
ckets for completeness and damage (Fig. 1)
■
Prepare tools (Fig. 2)
