Installation Procedures (Ceiling flush mount):
Please take out all parts which are inside the lamp body, and lay out all parts
and read the instructions prior to installation.
1. Release all the clips on both sides of
the light and remove the cover.
2. Open the two plastic locks according
to above picture to turn over the LED
strips fixed plate, take out all the
accessories such as screws and
waterproof connector.
A B
4. Feed the wires into the housing
through the waterproof connector.
Connect the power cord with the wiring
connector according to the label on the
LED driver, then tighten the connector
to secure the power cord.
3. Screw the waterproof connector and
make the thread part across a hole on
one end of light. Install the nut and
make it loose.
terproof connector
