10
Installation
c
Before beginning installation of this product, please
read the instruction manual and warnings below
carefully.
In package ,
- One piece unit
- Twopiece mounting clamp
- One piece instruction manual
A visual inspection of this product for possible damage occured during
shipment is recommended before installation. It is your responsibility to
ensure that qualified mechanical and electrical technicians install this
product.
If there is danger of serious accident resulting from a failure or defect in
this unit, power off the system and seperate the electrical connection of
the device from the system.
The unit is normally supplied without a power switch or a fuse. Use
power switch and fuse as required.
Be sure to use the rated power supply voltage to protect the unit
against damage and to prevent failure.
Keep the power off until all of the wiring is completed so that electric
shock and trouble with the unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering
with the unit may results in malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous
atmospheres.
During the equipment is putted in hole on the metal panel while
mechanical installation some metal burrs can cause injury on hands,
you must be careful.
Montage of the product on a system must be done with it’s own
fixing clamps. Do not do the montage of the device with
inappropriate fixing clamps. Be sure that device will not fall
while doing the montage.
It is your responsibility if this equipment is used in a manner not
specified in this instruction manual.
a
c
This symbol is used for safety warnings. User must pay
attention to these warnings.
i
This symbol is used to determine the dangerous
situations as a result of an electric shock. User must
pay attention to these warnings definitely.
This symbol is used to determine the important notes
about functions and usage of the device
Company
Information:
Kessler-Ellis Products
10 Industrial Way East
Eatontown, NJ 07724
Phone:
800-631-2165 or 732-935-1320
Fax:
Email:
Web:
732-935-9344
www.kep.com
• www.kepmline.com
Kessler-Ellis Products warrants that the equipment delivered is free
from defects in material and workmanship. This warranty is
provided for a period of two years. The warranty period starts from
the delivery date. This warranty is in force if duty and
responsibilities which are determined in warranty document and
instruction manual performs by the customer completely.
Repairs should only be performed by trained and specialized
personnel. Cut power to the device before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol,
Trichlorethylene etc.). Use of these solvents can reduce the
mechanical reliability of the device. Use a cloth dampened in ethyl
alcohol or water to clean the external plastic case.
Warranty
Maintenance
Other Information
Ordering Information
Model Number
mL-PIDC6
Description
PID PROCESS CONTROLLER 48 X 96 1/8 DIN
100-240 VAC (-15%; +10%) 50/60Hz
Universal process input (TC, RTD, mV, V, mA) Additional 0/4 -
20 mA Input
RS-485 serial communication with Modbus RTU protocol
1 Form C Relay Alarm Output (5A @ 250VAC with Resistive
Load)
1 Form A Relay Control Output (3A @ 250VAC with Resistive
Load)
m
LINE
mL-PIDC8
Description
PID PROCESS CONTROLLER 96 X48 1/8 DIN
100-240 VAC (-15%; +10%) 50/60Hz
Universal process input (TC, RTD, mV, V, mA) Additional 0/4 -
20 mA Input
RS-485 serial communication with Modbus RTU protocol
1 Form C Relay Alarm Output (5A @ 250VAC with Resistive
Load)
1 Form A Relay Control Output (3A @ 250VAC with Resistive
Load)
