18
3-10 Setup Procedure For The Batcher
3-10 Setup Procedure For The Batcher (continued)
MENU ITEM 6
RATE
(continued from previous page)
From the previous page, we are in the SIG FIG setting portion of the Ratemeter setup Menu.
PRESS
DISPLAY
SIG FIG ##
Store new WINDOW.
SIG FIG indicates how many meaningful digits are shown.
For example, if SIG FIG
is set at three; a rate of 24737.89 will be displayed as 24700; a rate of 0.739216 will be
displayed as 0.739. Note that trailing zeroes will be inserted only if necessary. Digits
beyond the SIG FIG value are truncated and zeroes are inserted as needed, no round-
ing is done.
SIG FIG 00
Clears out existing SIG FIG number value.
SIG FIG 04
As an example,
display will show 4 signifi cant fi gures.
WEIGHT##
Store new SIG FIG.
WEIGHT is an averaging factor. Higher settings provide more averaging for a more
stable rate display. Derived from:
(OLD DATA • “WEIGHT” + NEW DATA)
(OLD DATA • “WEIGHT” + NEW DATA)
(“ 1)
WEIGHT 00
Clears out existing WEIGHT value.
WEIGHT04
As an example,
RUN MODE
The Ratemeter portion of the Batcher is now setup.
CLR
1 2 3 4
ENT
ENT
CLR
1 2 3 4
ENT
