background image

Preparation section

XD-SERIES (En)

7

Safety tab (accidental erasure prevention tab)

After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.

For B side

For A side

To store cassette tapes

Do not store the tapes in a place which is subject to
direct sunlight, or near equipment that generates heat.
Keep the cassette tapes away from any magnetic field.

To re-record

Apply tape only to the position where
the tab has been removed.

When there is slack in the tape

In such a case, insert a pencil into the reel hole and wind
the reel hub to remove the slack.

N

S

1.Longer tape than 110 minutes cassette tape

Since longer tape than 110 minutes cassette tape is very thin, the tape could adhere to the pinch roller or be
easily cut. It is recommended that these tapes not be used with this unit to prevent possible damage.

2.Endless tapes

Do not use an endless tape, as this could damage the mechanism of the unit.

Notes

Notes

Notes on cassette tape

Handling of discs and tapes

Label side

Playing side

Cleaning

If fingerprints or foreign matter become
attached to the disc, lightly wipe the disc
with a soft cotton cloth (or similar) from
the center of the disc outwards in a radial
manner.

Storage

When a disc is not to be played for a
long period of time, remove it from the
player and store it in its case.

Handling

Hold the discs so that you do not touch
the playing surface.

Disc handling precautions

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring,
etc.) which are marketed for improving the sound quality or pro-
tecting discs as well as the disc cleaner should not be used with
this system because they may cause malfunction.

Do not attach paper or tape to either
the playing side or the label side of the
discs.

Sticker

Sticky paste

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed disc
or a disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they may
cause a malfunction.

Discs which can be played with this unit

CD (12 cm, 8 cm), and the audio part of CDV, CD-G, CD-EG

and CD-EXTRA.

Use discs that comply with the IEC standard, for example

a disc carrying the

marking on the label surface.

Содержание XD-402

































































Отзывы: