Kenwood XD-402, Инструкция по эксплуатации

Страница: 28 / 64

XD-SERIES (En)
28
Basic section
1.
Load a cassette tape.
(Recording is available on deck B only.)
2.
Select the tape transport direction.
Let's record
Recording on TAPE
1
Open the door of deck B.
2
Insert a tape.
3
Close the door.
1
Select deck B by pressing the
A/B key.
2
Press the play key correspond-
ing to the desired direction.
3
Stop playback (by pressing the
&
key).
To reverse the transport direction
÷
When recording is started, the
tape is transported in the direction
selected in this step.
÷
Wind the tape to the position
where recording is to be started.
Check the tape transport direction indicator.
£
3.
Set the recording condition.
1
Select the reverse mode.
ª
2
Select the DOLBY NR mode. (XD-5...series only)
ª
0
PUSH
OPEN
1 1
A
&
¡
#
¡
#
2 2
÷
The Tape Equalizer cannot be used in recording. (XD-4...series only)
When equalizer or another effect is applied
to the sound, the sound with the applied
effect can be recorded.
i
Note that this cassette deck cannot record onto
Metal tapes.
Note Note Note
REV. MODE DOLBY NR
3 3
÷
Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷
Remove tape slack before load-
ing.
R D S
1 1
5 5
3 3
4 4
2 2