Kenwood X-VH7 Скачать руководство пользователя страница 59

Страница: 59 / 64

RD-VH7/X-VH7 (EN)

In case of difficulty

Remedy

Symptom

Cause

Amplifier-tuner/ CD player, speakers

Radio stations cannot be re-
ceived.

Noise interferes with radio
reception.

Preset call operation cannot
receive a radio station which
has been preset.

A CD is placed in the player
but it cannot be played.

Even when the “

eject” key

is pressed, “PLEASE WAIT” is
displayed and the disc will
not be ejected.

Sound is not produced.

Sound skips.

A played disc is damaged.

Connect antennas.

Select a band.

Tune to the frequency of the de-
sired station.

Install the outdoor antenna in an
apart position from the road.

Switch the suspected electric ap-
pliance OFF.

Install the TV or the system at an
increased distance between them.

Preset stations with tunable fre-
quencies.

Preset stations again.

Place the disc properly, with the la-
bel side facing upward.

Clean the disc referring to

“Disc

handling precautions”

Try another disc.

Refer to

“Caution on condensa-

tion”

and remove the condensa-

tion by evaporation.

Wait until

“PLEASE WAIT”

disap-

pears, then press the

“

eject”

key.

Place a disc in the CD player.

Press the

“

”

key.

Clean the disc referring to

“Disc

handling precautions”

Try another disc.

Clean the disc referring to

“Disc

handling precautions”

Try another disc.

Install the unit in a place not sub-
ject to vibrations.

Clean the CD insertion slot and the
surroundings.

Do not use a burred disc.

›

The antennas have not been con-
nected.

A proper broadcasting band has not
been selected.

The frequency of the station to be
received is not tuned.

Car ignition noise.

Influence of an electric appliance.

A TV set is installed near the sys-
tem.

The frequency of the preset station
is not tunable.

The preset memory has been
cleared because the power cord
has been unplugged for a long pe-
riod.

The disc is placed upside down.

The disc is extremely dirty.

The disc is scratched.

Dew is condensed on the optics
lens.

The disc has not been placed.

The player is not put to the play
mode.

The disc is extremely dirty.

The disc is scratched.

The disc is dirty.

The disc is scratched.

The player is subject to vibration.

Dust is accumulated on the CD in-
sertion slot.

Burr is left on the outer or inner
edge of the disc.

REFERENCE INFORMATION

Содержание X-VH7

































































Результаты поиска

Содержание X-VH7

Отзывы:

Похожие инструкции для X-VH7

Бренды по названию

Популярные бренды

Kenwood X-VH7, Инструкция по эксплуатации

Результаты поиска

Содержание X-VH7

Отзывы:

Похожие инструкции для X-VH7

Бренды по названию

Популярные бренды