Kenwood VRS-7200 - AV Receiver, Инструкция по эксплуатации

Страница: 21 / 60

21
EN
Preparing for playback
7
Input the distance to the speakers.
This setting allows the signals output from different speakers to reach
the listening position simultaneously.
÷
In steps
7
, indications appear only for the selected channels of the
speakers that require adjusting.
Measure the distance from the listening position to each
of the speakers.
Jot down the distance to each of the speakers.
Distance to Front speaker (L) : ____ feet (meters)
Distance to Center speaker (C) : ____ feet (meters)
Distance to Front speaker (R) : ____ feet (meters)
Distance to Surround speaker (RS) : ____ feet (meters)
Distance to Surround back speaker (RB) : ____ feet (meters)
Distance to Surround back speaker (LB) : ____ feet (meters)
Distance to Surround speaker (LS) : ____ feet (meters)
Distance to Subwoofer (SW) : ____ feet (meters)
1
Use the MULTI CONTROL
@
/
#
(or the
@
/
#
keys) to
select "DISTANCE" on setup displays, and press the
ENTER.
2
Use the MULTI CONTROL
@
/
#
(or the
@
/
#
keys) to
select the unit and press the ENTER.
1
" METERS "
2
" FEET "
3
" EXIT ": Press the ENTER again to return to the main
setup displays.
3
Use the MULTI CONTROL
@
/
#
(or the
@
/
#
keys) to
select the speakers and the MULTI CONTROL
%
/
fi
(or the
%
/
fi
keys) to adjust the distance to the front
speakers.
The speaker indicator to be adjusted blinks.
÷
The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
÷
The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4
Repeat steps
3
to input the distance for each of the
speakers.
5
Press the ENTER again to return to the main setup
displays.
Indication in meters
8
Adjust the LFE LEVEL (Low Frequency Effects level).
Adjust the level of the low-frequency fields effect (LFE) signal, which is
the signal used exclusively for giving the field effect of bass tone, in the
Dolby Digital or DTS signal.
1
Use the MULTI CONTROL
@
/
#
(or the
@
/
#
keys) to
select "LFE LEVEL" on setup displays, and press the
ENTER.
2
Use the MULTI CONTROL
%
/
fi
(or the
%
/
fi
keys) to
adjust the LFE LEVEL.
÷
The LFE LEVEL is adjusted from 0dB to -10dB in 1dB
step decrements.
3
Press the ENTER again to return to the main setup
displays.
9
Set up the GAME jacks on the front panel.
Perform the setup for convenience of playing a video game using the
receiver.
1
Use the MULTI CONTROL
@
/
#
(or the
@
/
#
keys) to
select "GAME FUNC" on setup displays, and press the
ENTER.
2
Press the MULTI CONTROL
%
/
fi
(or the
%
/
fi
keys)
to select the game mode.
1
"
MODE 1
" :
When the connected game machine is turned ON, the input
selector is switched automatically to " GAME ". In addition,
the ACTIVE EQ function is switched to " EQ GAME " and the
listen mode is switched to the appropriate mode for games.
2
"
MODE 2
" :
When the connected game machine is turned ON, the input
selector is switched automatically to " GAME ".
3
"
OFF
" :
The game mode is switched OFF.
÷
The game mode is not activated if no video signal is input to
the VIDEO jack in the GAME jack section.
÷
The game mode is not activated when the DUAL SOURCE
function is switched ON.
¢
3
Press the ENTER again to return to the main setup
displays.