Kenwood VRS-7200 - AV Receiver Скачать руководство пользователя страница 20

Страница: 20 / 60

Preparing for playback

Use the MULTI CONTROL

ﬁ

(or the

ﬁ

keys) to

select the appropriate BS/SW amp setting.

BS/SW BS

Select this setting when a surround back speaker is

connected to the

SURR BACK/SW

terminals. In this

case, the subwoofer signal will be output from the

PRE

OUT SUBWOOFER

jack.

BS/SW SW

Select when the subwoofer speaker is connected to the

SURR BACK/SW

terminals. In this case, the surround

back signals will be output from the

PRE OUT SUR-

ROUND BACK

jacks.

BS/SW OFF

Select when no speaker is connected to the

SURR

BACK/SW

terminals. In this case, the subwoofer signal

will be output from the

PRE OUT SUBWOOFER

jack and

the surround back signals will be output from the

PRE

OUT SURROUND BACK

jacks.

If "

BS/SW BS

" is selected, only one surround back

speaker can be connected to the receiver.

If "

BS/SW SW

" or "

BS/SW OFF

" is selected, two sur-

round back speakers can be connected to the

PRE OUT

SURROUND BACK

jacks through an external power

amplifier.

Use the MULTI CONTROL

(or the

key) to accept

the setting.

The subwoofer re-mix setting indication "

REMIX

" appears.

Use the MULTI CONTROL

ﬁ

(or the

ﬁ

keys) to

select the appropriate subwoofer re-mix setting.

If "

REMIX ON

" is selected as the subwoofer re-mix setting,

the low frequencies are enhanced by adding the low fre-

quencies of other channels to the subwoofer channel

depending on the speaker setup.

REMIX ON

" :

Subwoofer re-mix setting mode to the receiver is ON.

REMIX OFF

" :

Subwoofer re-mix setting mode to the receiver is OFF.

The initial setting is "

REMIX ON

The subwoofer re-mix setting is possible only when the

subwoofer setting is "

SUBW ON

" and the front speaker

setting is "

FRNT LRG

Press the ENTER. If your selection is correct, press
the MULTI CONTROL

ﬁ

(or the

ﬁ

keys) to se-

lect "OK".

Press the ENTER again to return to the main setup
displays.

Select "

CANCEL

" and press the

ENTER

to return to the

status before setup.

Adjust the speaker volume level.

From your usual listening position, adjust the volume levels. The volume

levels from each speaker should be the same.

In steps

, indications appear only for the selected channels of the

speakers that require adjusting.

Use the MULTI CONTROL

(or the

keys) to

select "SP LEVEL" on setup displays, and press the
ENTER.

Use the MULTI CONTROL

(or the

keys) to

select "AUTO", "MANUAL" or "OFF".

AUTO

": Select this setting to adjust the speaker volume

levels using the test tone. The test tone will be output from

every speaker channel in automatic sequence.

MANUAL

": Select to select the speaker channel to

output the test tone using the

MULTI CONTROL

(or the

keys).

OFF

": Select to adjust the speaker volume levels

using the current output signals. The speaker chan-

nel to output the output signal can be selected using

the

MULTI CONTROL

(or the

keys).

EXIT

": Press the

ENTER

again to return to the main

setup displays.

When "AUTO" or "MANUAL" is selected and the ENTER
is pressed again, the test tone output will start.

Use the MULTI CONTROL

ﬁ

(or the

ﬁ

keys) to

adjust the volume level of the test tone output from the
speaker channel to be adjusted.

For "AUTO" selection, the first test tone is heard from
the front left speaker for 2 seconds. The next test tone
is heard from the speakers in the following sequence
for 2 seconds each.

When the "BS/SW BS" has been selected :

When the "BS/SW SW" or "BS/SW OFF" has been selected:

The channel indication blinks while the test tone is being output.

When a speaker setup is set to off the volume level for

the corresponding speakers is reset to 0 dB.

When "MANUAL" or "OFF" is selected, press the MULTI
CONTROL

(or the

keys) to select the speaker

channel and then press the MULTI CONTROL

ﬁ

(or the

ﬁ

keys) to adjust the speaker volume level.

Press the ENTER again to return to the main setup dis-
plays.

The test tone is turned off and return to the main setup

displays.

Continued to next page

Содержание VRS-7200 - AV Receiver





























































Результаты поиска

Содержание VRS-7200 - AV Receiver

Отзывы:

Похожие инструкции для VRS-7200 - AV Receiver

Бренды по названию

Популярные бренды

Kenwood VRS-7200 - AV Receiver, Инструкция по эксплуатации

Результаты поиска

Содержание VRS-7200 - AV Receiver

Отзывы:

Похожие инструкции для VRS-7200 - AV Receiver

Бренды по названию

Популярные бренды