Kenwood VR9070 - THX-Certified Home Theater Receiver Скачать руководство пользователя

Страница: 40 / 52

Basic remote control operations for other components

Operating other components

This operation lets you operate the registered components.

SOURCE

(Source power)

Source keys

Use the Source keys to select the component you desire.

• Pressing the source keys also changes the input selector on the

receiver.

Press the SOURCE key.

• To return to the receiver operation mode, press the

RCV MODE

key.

Press the operation keys you desire.

The remote control mode remains at the selected input. If you
wish to operate another component, repeat step

Resetting the Remote Control

• To initialize the remote control, press the

LEARN

key until the

blinks twice. Then press the Numeric key to enter

. The

will blink twice.

Repeat step

three more times for the remaining digits. Use

“2” for the second digit, “3” for the third digit, and “4” for the
fourth digit.

To check the codes of your other components, repeat steps

through

, but substitute the appropriate key (i.e., DVD/

6CH, VIDEO 1, VIDEO 2, VIDEO 3, CD/DVD, MD/TAPE, PHONO,
AV AUX, TV MODE) for the component you are checking.

• As suggested earlier on, write down each of the four-digit code.
•

PHONO

key has to be re-assigned to another key before a setup

code can be programmed.

Re-assigning device keys

The remote control can be setup to control second TV or VCR, or any
combination of eight home entertainment components.
For example, to control the operation of two different VCR using the
remote control, the user need to re-assign the unused

VIDEO 2

key to

operate the second VCR (VIDEO 1) as follows:

Press and hold the LEARN key until blinks twice, then
release the LEARN key.

Press the Numeric key to enter

•

will blink twice.

Press VIDEO 1 key once, then press the VIDEO 2 key once.

• The user now can operate VIDEO 2 as a second VCR along with

VIDEO 1.

• Refer to the table in the previous page for the combination of

source keys and the other components assignment.

To re-assign other device keys, repeat steps

through

substituting the key sequence from the below chart for the
most popular components:

To re-assign key

Sequence

Perform

TV MODE as 2nd VIDEO 1 key LEARN

9 9 2 VIDEO 1

TV MODE

TV MODE as 2nd VIDEO 2 key LEARN

9 9 2 VIDEO 2

TV MODE

TV MODE as 2nd CD/DVD key LEARN

9 9 2 CD/DVD

TV MODE

TV MODE back to TV MODE key LEARN

9 9 2 TV MODE TV MODE

VIDEO 1 as 2nd TV MODE key LEARN

9 9 2 TV MODE VIDEO 1

VIDEO 1 as 2nd VIDEO 2 key

LEARN

9 9 2 VIDEO 2 VIDEO 1

VIDEO 1 as 2nd CD/DVD key

LEARN

9 9 2 CD/DVD VIDEO 1

VIDEO 1 back to VIDEO 1 key LEARN

9 9 2 VIDEO 1 VIDEO 1

To clear the re-assignment and reset the remote control to its
original operation mode:

Press and hold the LEARN key until

blinks twice, then

release the LEARN key.

Press the Numeric key to enter

Press VIDEO 2 key twice.

• When a re-assignment is done, will blink twice to confirm your

choice. At that time, you will need to program the remote control
in order to control the new component.

• If an invalid key sequence is entered, blink once and return to

normal operation.

• When in Tuner mode, re-assignment is not available.

*5553/39-52/EN

05.2.18, 3:27 PM

Содержание VR9070 - THX-Certified Home Theater Receiver





















































Результаты поиска

Содержание VR9070 - THX-Certified Home Theater Receiver

Отзывы:

Похожие инструкции для VR9070 - THX-Certified Home Theater Receiver

Бренды по названию

Популярные бренды

Kenwood VR9070 - THX-Certified Home Theater Receiver, Инструкция по эксплуатации

Результаты поиска

Содержание VR9070 - THX-Certified Home Theater Receiver

Отзывы:

Похожие инструкции для VR9070 - THX-Certified Home Theater Receiver

Бренды по названию

Популярные бренды