background image

23

 EN

Preparing for playback

Some preparatory steps are needed before starting playback.

INPUT MODE

SPEAKERS

(

POWER 

ON/STANDBY

)

    

Turning on the receiver

1

Turn on the power to the related components.

2

Turn on the power to this receiver by pressing the 

 (POWER

ON/STANDBY) key.

Selecting the input mode

If you have selected a component connected to the 

CD/DVD, VIDEO 2,

VIDEO 3 

or

 DVD/6CH 

jacks, make sure that the input mode setting is

correct for the type of audio signal to be used.

8

Selecting the speaker system

Press the SPEAKERS key to select the speaker system to be
used.

A ON

:

Sound from the speakers connected to the 

SPEAKERS A

terminals on the rear panel.

B ON

:

Sound from the speakers connected to the 

SPEAKERS B

terminals on the rear panel. No sound will be heard from
the subwoofer.

A+B ON :

Sound from both the speakers connected to the

SPEAKERS A 

and

 B

 terminals on the rear panel.

A+B OFF :

No sound from the speakers. The display segments are
different depending on the type of input signal.

The indicator for the speakers
you want to use should be lit.

L

SL S

SB

SR

C

R

SP

MUTE

A B

CLIP

LFE

• Selecting “6CH INPUT” by pressing the 

INPUT MODE

 key, whereby

“DVD/6CH” is the input source will cause 

SPEAKERS A

 to be selected

automatically.

• When the 

SPEAKERS B

 is turned ON, the Listen mode will be

switched to STEREO.

Normal playback

Listening to a source component

1

Use the INPUT SELECTOR key and AV AUX/GAME key, or
Input Selector keys to select the source you want to listen to.

1

TUNER

2

CD/DVD

3

MD/TAPE

4

VIDEO 1

5

VIDEO 2

6

VIDEO 3

7

DVD/6CH

8

PHONO

9

AV AUX [GAME] (or AV AUX)

2

Start playback from the selected source.

3

Use the VOLUME CONTROL knob or VOLUME 

%

/

 keys to

adjust the volume.

Set up the AV AUX jacks on the front panel

Perform the setup for convenience of playing a video game using the
receiver.

1

Use the AV AUX/GAME key to select “AV AUX [GAME]” (or “AV
AUX”).

2

Press and hold the AV AUX/GAME key for more than 2 seconds
for the following selections;

1

AV AUX [GAME] :

When the connected game player is turned
ON, the input selector is switched automati-
cally to 

“AV AUX [GAME]”

. In addition, the

ACTIVE EQ function is switched to “ACTIVE
EQ GAME”, and the Listen mode is switched
to the appropriate mode for games.

2

AV AUX

:

The game mode is switched off.

• The game mode is not activated if no video signal is input to the 

VIDEO

or 

S-VIDEO

 jack in the 

AV AUX

 jack section.

VOLUME CONTROL

VOLUME

%

/

Input Selector
keys

AV AUX/GAME

INPUT SELECTOR

*5553/20-29/EN

05.2.8, 0:57 PM

23

Содержание VR9070 - THX-Certified Home Theater Receiver





















































Отзывы: