20
EN
Speaker settings
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (Subwoofer, Front,
Center, Surround and Surround Back Speakers) as described below.
1
Turn on the power to this receiver by pressing the (POWER
ON/STANDBY) key or RECEIVER ON key.
2
For the remote control unit, press the RCV MODE key to
switch to receiver mode.
3
Press the SETUP key to enter the SETUP mode.
Use
5
/
∞
keys or MULTI
@
/
#
keys for the following displays.
1
SP SETUP
2
CROSSOVER
3
TEST TONE
4
BASS PEAK
5
SP DISTANCE
6
LFE LEVEL
7
DISP MODE
8
EXIT
The flow of the SETUP is as follows:
Display Selector
Display Listen
BASS
PEAK
LFE
LEVEL
DISP
MODE
EXIT
SP
SETUP
Subwoofer
Front
Center
Surround
Surround
Back
Subwoofer
Re-mix
Front Left
Center
Front Right
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Subwoofer
SP
DISTANCE
CROSSOVER
FREQ:40Hz
FREQ:60Hz
FREQ:80Hz-THX
FREQ:100Hz
FREQ:120Hz
FREQ:150Hz
TEST
TONE
T. TONE
MANUAL
T. TONE
AUTO
L
C
R
SR
SBR
SL
SBL
SW
L
C
R
SR
SBR
SBL
SL
SW
4
Select a speaker system.
If you have THX certified speakers, please set them to NML/THX.
1
Select the SP SETUP and press the SETUP key again so that
the Subwoofer setting indication “SUBW ON” appears.
L
SL
SB
SR
C
R
SP
MUTE
A B
CLIP
SW
LFE
STEREO
2
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the appropriate Subwoofer setting.
1
SUBW ON
:
Subwoofer setting mode to the receiver is ON.
2
SUBW OFF :
Subwoofer setting mode to the receiver is OFF.
• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the Front Speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step
6
.
• When Subwoofer output sound is required, select “FRNT NML/
THX”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
3
Press the
5
key or MULTI
#
key to accept the setting.
• The Front Speakers setting indication “FRNT” appears.
L
SL
SB
SR
C
R
SP
MUTE
A B
CLIP
SW
LFE
STEREO
4
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the appropriate Front Speakers setting.
1
FRNT NML/THX :
A v e r a g e s i z e F r o n t S p e a k e r s a r e
connected to the receiver.
2
FRNT LARGE
:
Large size Front Speakers are connected
to the receiver.
5
Press the
5
key or MULTI
#
key to accept the setting.
• The Center Speaker setting indication “CNTR” appears.
6
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the appropriate Center Speaker setting.
If you selected “FRNT LARGE” as the Front Speakers setting,
1
CNTR NML/THX :
An average size Center Speaker is con-
nected to the receiver.
2
CNTR LARGE
:
A large size Center Speaker is connected
to the receiver.
3
CNTR OFF
:
Center Speaker setting mode to the re-
ceiver is OFF.
If you selected “FRNT NML/THX” as the Front Speakers
setting,
1
CNTR NML/THX :
An average size Center Speaker is
connected to the receiver.
2
CNTR OFF
:
Center Speaker setting mode to the
receiver is OFF.
7
Press the
5
key or MULTI
#
key again to accept the setting.
• The Surround Speaker indication “SURR” appears.
8
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the appropriate Surround Speaker setting.
If you selected “FRNT LARGE” as the Front Speaker setting,
1
SURR NML/THX :
Average size Surround Speakers are con-
nected to the receiver.
2
SURR LARGE
:
Large size Surround Speakers are con-
nected to the receiver.
3
SURR OFF
:
Surround Speaker setting mode to the
receiver is OFF.
SETUP
MULTI CONTROL
RECEIVER ON
MULTI
%
/
fi
,
@
/
#
(
POWER
ON/STANDBY
)
RCV MODE
SOUND
SOUND
SETUP
Preparing for surround sound
*5553/20-29/EN
05.2.8, 0:57 PM
20
