Kenwood UCR 420, Инструкция по установке и эксплуатации

Страница: 22 / 32

6: Troubleshooting
Page 20
Kenwood 72X and 62X TrueX User’s Guide
Symptom/Solution:
Getting a ‘Not ready reading drive D:’ error message:
• Confirm that a disc is loaded into the CD-ROM drive.
• Make sure that the CD-ROM disc is “label-side” up and seated correctly
on the tray.
• Try a different disc to verify that the original disc is not bad.
When the computer is powered on, no video appears on the screen:
• Make sure the CD-ROM drive’s IDE ribbon cable is properly seated.
• Examine the cable to confirm the red stripe is properly aligned with
“Pin 1” on all connections.
CD-ROM drive door won’t open:
• Make sure power is connected to the drive.
• Make sure the CD-ROM drive’s IDE ribbon cable is properly seated.
• Examine the cable to confirm the red stripe is properly aligned with
“Pin 1” on all connections.
• Examine the face of the CD-ROM drive itself to verify that there is nothing
blocking the drawer from opening (e.g. tape or other obstruction).
• If a CD-ROM disc was put in the drive incorrectly, the disc may be blocking the
tray. Try to open the tray with the emergency eject hole (as outlined in Section 5).
KW-40 72/62X atapi manual 12/13/99 3:25 PM Page 22