Kenwood TK-90, Руководство по обслуживанию

Страница: 11 / 142

TK-90
11
• Menu list
Menu No. Item Display Set Value
1 Mic Gain Level MIC GAIN 1 to 5
2 Minimum Volume MIN VOLUME 0 to 31
3 Ignition Sense IGNIT SENSE OFF / TYPE 1 (Ignition and Switch) / TYPE 2 (Ignition Only)
4 Scan Resume SCAN RESUME CO (Carrier Operate) / TO (Time Operate)
5 Time Operated Wait TO WAIT 3 sec to 10 sec
6 Dropout Delay Time DROP DELAY 0 sec to 300 sec
7 Scan Resume after Transmit SCAN-RSM TX ON / OFF
8 Dwell Time DWELL TIME 0 sec to 300 sec
9 Revert Channel REVERT CH TYPE 1 (Selected) / TYPE 2 (Se Talkback) /
TYPE 3 (Preferred Channel) / TYPE 4 (Preferred C Talkback)
10 Preferred Channel Scan Interval P-SCN INTVL 1 to 5
11 Preferred Channel PREF CH NONE / Programmed channel
12 Time-out Timer TOT OFF / 3 min / 5 min / 10 min / 20 min / 30 min
13 Transmit Power for VFO Mode VFO TX PWR HIGH / MEDIUM / MEDIUM LOW / LOW / INHIBIT
14 IF Filter SSB IF-FIL SSB BUILT-IN / OPTION
15 IF Filter DATA IF-FIL DATA BUILT-IN / OPTION
16 IF Filter FSK IF-FIL FSK BUILT-IN / OPTION
17 CW Break-in BREAK-IN ON / OFF
18 CW Break-in Delay Time CW DELAY FULL / 50 ms to 1000 ms (50 ms step)
19 DI Level DI LEVEL 0 to 9
20 DEO Level DEO LEVEL 0 to 9
21 FSK Reverse FSK REVERS NORMAL / REVERSE
22 DATA Sideband DATA S-BAND USB / LSB
23 FSK Transmit Polarity POLARITY NORMAL / REVERSE
24 FSK Transmit Shift Frequency FSK SHIFT 170Hz / 200Hz / 425Hz / 850Hz
25 FSK Receive Tone Frequency FSK TONE 1275Hz / 2125Hz
26 VFO Mode / Channel Mode MCH/VFO VFO / M CH
DEALER MODE
CHANNEL
[ ] or [ ]
[ ]
[ ] or [ ]
[ ] or [ ]
[ ] or [ ]
FUNCTION
M 1
M I C G A I N
M 2
MIN VOLUME
M 2 6
M C H / V F O
[ ]
[ ] : Data is stored
[ ]
[ ] or [ ]
Item select
[ ] or [ ]
(Level 1~5)
[ ]
FUNCTION
M 1
M I C G A I N
M 1
LEVEL 4
[ ]
: Cancel
[ ]
: Cancel
Item select
Dealer mode
[ ]
User mode
REALIGNMENT /
!
■
Function setting mode • Operation example