18
TK-880
7-2. Channel Setting Mode
Each channel can be setup in its action mode by using
the panel keys.
• Pressing [
■
] while “SELF PROG” is displayed will
change to channel setting mode.
• Press [D] to select a setup item, then press [Channel up/
down] to change the selection.
• By pressing [C], the displayed information is stored in
memory, and the next item appears. By pressing [D], the
displayed information is not stored in memory, and the
next item appears.
• Press [
■
] to return to the original display (“SELF PROG”).
The setup items fro channel setting mode are listed be-
low.
Setup function
Display
Remarks
(3 character)
Channel selection
CH or GRP
RX frequency
RXF
[CALL] : Switches frequency on/off
[B] : Changes the step value
between 5kHz, 6.25kHz, and
1MHz
RX signalling
RXS
[CALL] : Switches between off,
QT, and DQT.
[B] : Switches between 1 step
and standard
[A] : Switches between DQT
normal and invert
TX frequency
TXF
Same as RX frequency
TX signalling
TXS
Same as RX signalling
Scan del/add
SCN
DEL/ADD
RF power
PWR
HIGH/LOW
Beat shift
SFT
YES/NO
Wide/Narrow
W/N
WIDE 5k/WIDE 4k/NARROW
Compander
CMP
ON/OFF
Note :
Wide 4k cannot be selected for E3 type when choosing
wide or narrow.
REALIGNMENT
7-3. Flow Chart
Self programming
mode
Channel setting
mode
Channel selection
Group selection
[C]
[CALL]
[CALL]
[CALL]
OFF
QT
OFF
[CALL]
[A]
[CALL]
DQT N
DQT I
[D]
RX frequency
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
[C]/[D]
RX signalling
TX freuency
TX signalling
Scan delete/add
RF power high/low
Beat shift yes/no
Wide/Semi wide/Narrow
Compander
[CALL]
[CALL]
[CALL]
OFF
QT
OFF
[CALL]
[A]
[CALL]
DQT N
DQT I
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
7-4. Memory Reset Mode
You can clear all settings you made in self programming
mode, or you can return to the original display.
• Press [A] while “SELF PROG” is displayed will change
the display to “CLEAR NO?”.
• Press [Channel up/down] to change the display between
“CLEAR NO?” and “CLEAR YES?”.
• When “CLEAR YES?” is displayed, pressing [A] will set
all data to default, and “ALL CLEAR” will appear on the
display. Press [A] again to display “SELF PROG”.
• When “CLEAR NO?” is displayed, pressing [A] will can-
cel the reset, and “SELF PROG” will be displayed.
Содержание TK-880 series
Страница 71: ...TK 880 TK 880 TK 880 95 BLOCK DIAGRAM ...