Kenwood TK-760G series, Руководство по обслуживанию

Страница: 65 / 67

80
TK-760G/ ( N ) /762G/ ( N )
TERMINAL FUNCTION
CN1 (TX-RX Unit)
Pin No. Name Function
1 8C DC 8V output.
2 5S DC 5V output.
3 AUX5
4 AUX6
5 NC Non-connection
6 AUX3 SQ : Squelch detect output. *1
7 AUX1 PTT : External PTT input. *1
8 AUX4
9 AUX2 DTC : Data channel control/External hook input.
CHDATA : Channel control serial data input.
10 ALT Alert tone input.
11 AFO Receiver audio signal output.
12 AFI Reseiver audio signal input.
13 MII Transmit audio signal input.
14 MIO Transmit audio signal output.
15 GND Ground
CN2 (TX-RX Unit)
←→
CN501 (Control Unit)
Pin No. Name Function
1 SFTDT Serial data for IC9 (Shift register).
2 UL Lock detect.
3 PLST Strobe signal for IC3 (PLL IC).
4 PLDT Serial data for IC3 (PLL IC).
5 PLCK Clock pulse for IC3 (PLL IC).
6 RSSI Receive signal strength indicator.
7 ASQ Analog squelch.
8 TO Transmit sub-tone signal output.
9 SFTST Strobe signal for IC9 (Shift register).
10 DAST Strobe signal for IC6 (Shift register).
11 CNTDT Control serial data for IC6.
12 CNTCK Control clock pulse for IC6.
13 W/N Not used.
14 CTO Received sub-tone signal.
15 DTMFIO DTMF signal.
16 MO Modulation signal.
17 AFO Receiver audio signal.
18 SB Switched B.
19 SB Switched B.
20 PSW Power switch.
21 AUX3 Optional unit control signal.
22 AUX1 Optional unit control signal.
23 AUX4 Optional unit control singal.
24 AUX2 Optional unit control signal.
25 EMG Foot switch input signal.
26 8C DC 8V.
27 MM MIC mute.
28 MI External MIC input signal.
29 OE Output enable for IC9.
30 ALT Alert tone signal.
31 DEO Receiver detector output.
32 MII Transmit audio signal input.
33 MIO Transmit audio signal output.
34 GND Ground.
CN3 (TX-RX Unit)
Pin No. Name Function
1 HOR Horn alert/call output.
2 E Ground.
3 SB Switched B+, DC 13.2V output, Maximum 1A.
CN4 (TX-RX Unit)
Pin No. Name Function
1 DEO Receiver detector output.
Level : 0.5Vrms (Atandard modulation)
2 DTC Data channel control/External hook input.
3 IGN Ignition sense input.
4 DI Data modulation input.
5 ME External microphone ground.
6 MI EXternal microphone input.
7 PTT External PTT input, active low.
8 SQ Squelch detect output.
CN5 (TX-RX Unit)
Pin No. Name Function
1 AM Speaker mute input, active high.
2 MM MIC mute input, active high
3 EMG EMG : Foot switch input, active low. *2
CN7 (TX-RX Unit)
Pin No. Name Function
1 PA/LI Relay for PA function KAP-1 control.
“H” : PA/LI on, “L” : PA/LI off
2 SPO Audio signal output to KAP-1
3 SPI Audio signal inpt from KAP-1
CN8 (TX-RX Unit)
Pin No. Name Function
1 SP Audio signal output to internal/external speaker.
2 E Ground
J501 (Control Unit)
Pin No. Name Function
1 MBL MIC backlight control.
2 PSB 13.2V.
3 GND Ground.
4 PTT/TXD PTT.
5 ME MIC ground.
6 MIC MIC signal input.
7 HOOK/RXD Hook detection
8 CM MIC data detection.
CN101 (PLL/VCO)
←→
TX-RX Unit
Pin No. Name Function
1 CV Control voltage input.
2 MD Modulation input.
3 8CL 8V input.
4 E Ground.
5 HT Signal output.
6 RX (ST) Switched transmit input. H : Transmit
*1 : MDT mode
*2 : Emergency mode